Related Manuals for Omega REC-12
Summary of Contents for Omega REC-12
- Page 1 REC-12 DELUXE KEYLESS ENTRY SYSTEM OWNER’S & INSTALLATION MANUAL (production manual has full color cover) This product is designed for professional installation only! COPYRIGHT: OMEGA RESEARCH & DEVELOPMENT 2009...
-
Page 2: Table Of Contents
Omega Research & Development, Inc., a leader in vehicle security Transmitter Functions Reference Guide ..........4 and convenience systems since 1970. The REC-12 is a very flexible system Using The Valet / Override Switch ............8 that provides many programmable features, when customized, can enhance or The Status Light ..................10... -
Page 3: System Overview
UNLOCK: Press and release the “UNLOCK” button. System Overview (cont’d) • THE HORN WILL HONK TWICE The Valet/Override Switch: This switch can be used to temporarily • THE LIGHTS WILL FLASH TWICE THEN TURN ON turn “off” certain automatic locking, anti-carjacking, and optional starter interrupt •... - Page 4 Transmitter Functions Reference Guide (cont’d) ACTIVATE 5TH CHANNEL: Press and release the “TRUNK” & “ ” buttons simultaneously. Consult your installer about this optional feature. PANIC: Press and hold the “LOCK” or “UNLOCK” button for 3 seconds. • THERE IS NO VISUAL OR AUDIbLE INDICATION FROM THIS SYSTEM.
-
Page 5: Using The Valet / Override Switch
When the system enters Valet Mode, the Status Light will illuminate Step 2 Using your key, turn the ignition “ON”. solid steady Red. If the REC-12 is installed with audible confirmation, the sys- Step 3 Within 5 seconds, press and release the Valet Switch once. The Status tem will chirp twice when it enters Valet Mode. -
Page 6: The Status Light
The Status Light Visual Confirmations The REC-12 includes a Status Light to inform you of the system’s op- The REC-12 is capable of flashing the vehicle’s parking lights and inte- erational condition. If your system includes a Starter Disable circuit, it’s condi- rior domelight to provide visual confirmation of system operations. -
Page 7: Starter Disable - Optional
Programmable Features If the system is in Valet Mode, it will also chirp once when the ignition is The REC-12 has 12 programmable features for maximum system cus- turned “OFF” as a reminder. Should any automatic locking options be enabled, tomization. - Page 8 Programmable Features (cont’d) Feature #7 Flashing light relay output Feature #4 Doors unlock when trunk release is activated Default setting: Flashing lights (press LOCK) Options: 5th Channel Single Pulse (press UNLOCK) Default setting: ON (press LOCK) 5th Channel Latch/Unlatch (press TRUNK) Option: OFF (press UNLOCK) Horn Honk Output (press...
-
Page 9: Changing The Programmable Features
Programmable Features (cont’d) Feature #11 Parking lights for 30 seconds after unlock by transmitter 90 Seconds After Ignition OFF & Unlocking By Transmitter (press TRUNK) Default setting: ON (press LOCK) This feature allows the system to automatically engage the starter disable whether or not the doors Options: OFF (press UNLOCK) are locked. -
Page 10: Full System Reset
Replacement transmitters are available for this system and can be UNLOCK buttons simultaneously. The system will respond with 3 horn honks. purchased from your installing dealer or directly from Omega R & D, Inc. To purchase directly from Omega R & D, Inc. visit us at www.caralarm.com or call Programming Transmitters us at 800-554-4053. -
Page 11: Installation Considerations
Installation Considerations Wiring Connections MOUNTING COMPONENTS MAIN 5 PIN HARNESS The Control Module: This contains electronic components so always mount BLACK: (-) Chassis Ground- This wire supplies ground for all of the system’s this module at a secure location inside the vehicle like under the dash. Ensure operations. -
Page 12: Secondary 7 Pin Harness
RED (+) or bLACK (-) wire to select the desired- interface available from Omega R & D, Inc. will plug directly into this port. There polarity. The polarity is determined by the vehicle’s light circuit. - Page 13 3 Wire Negative Doorlocks Wiring Connections (cont’d) With All Unlock Function DLP-P3 3 Wire Negative Doorlocks Using Optional DLP-P3 Green Wire blue Wire To Pink Wire - NOT USED With All Unlock Function To Door Lock Wire Door Unlock Wire Using Included DLP-N4 Green Wire blue Wire To...
-
Page 14: Driver's Door Priority Connection
Actuators BLUE wire would then be used to activate the driver’s door unlock. In almost Omega interfaces) all cases, this requires configuring the driver’s unlock output to be a 5-wire/re- versal rest at ground circuit. PLEASE REFER TO THE VEHICLE’S SCHEMAT- ICS AND CONFIRM bEFORE CONFIGURING THIS WAY. -
Page 15: Rec-12 Wiring Overview
REC-12 Wiring Overview Orange wire- Negative (-) Starter (-) Lock Pulse Slide Bracket For Clip-on Accessories Interrupt output. Gray wire- (+) Output (for relay COILS only) Negative (-) output Valet Switch Port for trunk release. (-) Unlock #1 Pulse Doorlock Output Port... -
Page 16: Programmable Features List
Programmable Features List Complete Programmable Features Matrix Feature Programming: Ignition on, off, press valet 5 times (horn honks, status light turns on) This device complies with FCC Rules part 15. Operation is subject to “ ... ” button # Feature Lock Button Unlock button Trunk button... - Page 17 Company will repair or replace it free of charge within the first year and thereafter all parts to be repaired will be free with only a nominal charge for Omega Research and Development, Inc.’s labor and return shipping, to the original owner during the lifetime of the car in which it was originally installed.