Advertisement
Chapter 11
Change Card Settings
Click the Thresholds subtab. The default selection is Near End, 15 Min, and Line
Step 7
Figure 11-1
As needed, complete the following:
Step 8
Click Line, Section, Path, or Physical to provision the line, section, path, and physical options in
a.
Table 11-3
Change the selection to Near End/Far End, 15 Min/1Day as necessary.
b.
Click Refresh to view or modify the thresholds for each selection.
c.
February 2008
Provisioning Thresholds for the OC-48 Card
for each OC-N port.
NTP-E66 Modify Line and Status Thresholds for Optical Ports
Cisco ONS 15600 Procedure Guide, R5.0
(Figure
11-1).
11-9
Advertisement
