Cisco UCS C220 M3 User Manual page 20

CONFIGURING the SERVER
Table 7 Available Plug-In PCIe Card RAID Options (continued)
Product ID (PID)
RAID Configuration Options
R2XX-RAID0
R2XX-RAID1
R2XX-RAID5
R2XX-RAID6
R2XX-RAID10
20 Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
PID Description
Factory preconfigured RAID striping option
Enable RAID 0 Setting. Requires a minimum of one hard drive.
Factory preconfigured RAID mirroring option
Enable RAID 1 Setting. Requires exactly two drives with the same size, speed,
capacity.
Factory preconfigured RAID option
Enable RAID 5 Setting. Requires a minimum of three drives of the same size,
speed, capacity.
Factory preconfigured RAID option
Enable RAID 6 Setting. Requires a minimum of four drives of the same size,
speed, capacity.
Factory preconfigured RAID option
Enable RAID 10 Setting. Requires a even number of drives (minimum of four
drives) of the same size, speed, capacity.
NOTE: Although RAID levels 50 and 60 are not orderable from the factory, they are
supported for selected controllers as shown in
NOTE: No RAID option can be chosen if you have no drives
Table 5