Hookflash; Use Hookflash To Activate Features; Hold; Hold And Resume A Call - Cisco 6901 User Manual

Hookflash

Hookflash allows you to activate features on your phone by quickly pressing and releasing the
hookswitch button on the phone cradle rest.

Use Hookflash to Activate Features

(Cisco Unified IP Phone 6901 only)
You can use hookflash to:
• Answer a call
• Transfer between two calls (when one call is incoming only)
• Initiate a conference call
• Remove a conference participant

Hold

Hold allows you to put an active call into a held state.
H
old and Resume a Call
1. To put a call on hold, press the Hold button
The Line button flashes green. The party that is put on hold hears the preset music.
2. To resume the call, press the flashing green Line button, press the Speaker button (Cisco Unified
IP Phone 6911 only), or go off hook, if the handset is in the cradle.

Meet Me

Meet Me allows you to call a predetermined number at a scheduled time to host or join a conference.
The conference begins when the host connects. Participants who join the conference before the host
has joined hear a busy tone and must dial again.
The conference ends when all participants hang up; the conference does not automatically end when
the host disconnects.
22
.
OL-20826-01