Calling Features; Auto Answer; Auto Answer With Your Speakerphone; Auto Barge - Cisco 6901 User Manual

Calling Features

Auto Answer

(Cisco Unified IP Phone 6911 only)
Auto Answer prompts your phone to automatically answer incoming calls after one ring.
Your system administrator sets up Auto Answer to work with your speakerphone.

Auto Answer with Your Speakerphone

Keep the handset in the cradle to auto answer with your speakerphone. Otherwise, calls ring normally
and you must manually answer them.

Auto Barge

Auto barge, if configured, allows you to barge into a shared line call automatically.
For example, in a shared line scenario, when you go off hook and a call remote is already in use, you
can barge into the call automatically.

Call Forward All

Call Forward All allows you to forward calls on your phone to another number.
You can set up Call Forward All directly on your phone. To access Call Forward All remotely, go to
your User Options web pages.
There are two types of call-forwarding features that your system administrator may set up on
your phone:
• Unconditional call forwarding (Call Forward All)—Applies to all calls that you receive.
• Conditional call forwarding (Call Forward No Answer, Call Forward Busy, Call Forward No
Coverage)—Applies to certain calls that you receive, according to conditions, and is accessible
only from your User Options web pages.
When forwarding calls from your phone, enter the call-forward target phone number exactly as you
would dial it from your phone. For example, enter an access code or the area code, if necessary.
Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager 8.0 (SCCP) 17