Default Settings - Sony XDS-1000 Operation Manual

2
Press the PUSH SET knob or the SELECT function
button (F2).
This displays the setting screen for the menu item
selected in step 1.
Example: Setting screen display when item 005
DISPLAY INFORMATION SELECT is selected
Current setting
3
Use the PUSH SET knob or the +/– function button
(F3 or F4) to change the setting.
Turning the PUSH SET knob while holding down the
SHIFT button increases the increment of adjustment.
4
To change other settings, press the PUSH SET knob or
the RETURN function button (F1) to return to the
previous screen, then repeat steps 1 to 3.
5
When you have completed the settings, press the
SAVE function button (F5).
The message "NOW SAVING..." appears on the video
monitor screen, while the new settings are saved in
memory. When the saving operation is completed, the
video monitor screen returns to its normal indications.
Notes
• If you power off the unit before a save operation is
completed, settings may be lost. Wait until the save is
completed before powering off the unit.
• If, instead of pressing the SAVE function button (F5),
you press the MENU button, the new settings are not
saved. The message "ABORT !" appears on the video
monitor screen for about 0.5 seconds, and the system
exits the menus. To change more than one setting, be
sure to press the SAVE function button (F5) after
making the settings.
To return menu settings to their factory

default settings

After changing menu settings, use the following procedure
to return the settings to their factory default settings
(setting initialization).
74
Setup Menu
To return a particular setting to its factory default
setting
In the screen that selects the setting of that item, press the
RESET button.
For example, proceed as follows to return the 005
DISPLAY INFORMATION SELECT item to its default
setting. This assumes that the setting has been changed
from the factory default "time data & status" in step 3 of
the procedure in "To change the settings of menu items"
(page 73).
1
Press the RESET button.
"time data & status" (factory default setting) is
selected.
2
Press the SAVE function button (F5).
The setting returned to its factory default is saved in
memory as the current setting.
To return all settings to their factory default
settings
1
Press the MENU button to display the setup menu.
2
Press the RESET button.
The message "INITIALIZE ALL ITEMS TO
FACTORY PRESET VALUES?" appears, to confirm
whether you wish to return all settings to their factory
default settings.
3
Press the SAVE function button (F5).
The message "NOW SAVING..." appears on the video
monitor screen, while the settings of all items are
returned to their factory default settings. These factory
default settings are saved in memory.
If you power off the unit while settings are being
saved, settings may not be correctly returned to their
factory default settings. Wait until the saving is
completed before powering off the unit.
To abandon the resetting operation
Instead of pressing the SAVE function button (F5),
press the RESET button.
The display returns to the top level of the setup menu,
leaving the settings unchanged.