About Dvb-Asi Input/Output (When The Optional Pdbk-202 Is Used) - Sony XDS-1000 Operation Manual

About DVB-ASI Input/
Output (When the
Optional PDBK-202 Is
Used)
When the optional PDBK-202 MPEG TS board is
installed, you can input/output DVB-ASI TS signals via
this connector.
Note
Even when the PDBK-202 is installed, this unit does not
allow for input/output of i.LINK TS signals.
Stream formats
The stream formats of DVB-ASI TS signals that can be
input to / output from this unit are listed below.
Notes
• This unit does not allow for input/output of DVB-ASI
TS signals in any format other than listed below.
• Set the program number for DVB-ASI TS of this unit so
as to match that of a device from which DVB-ASI TS
signals are input to this unit or a device to which DVB-
ASI TS signals are output from this unit. The program
number for DVB-ASI TS can be set with the setup menu
item 926 DVB-ASI SETTING (see page 82).
Video resolution/system frequency
1440 × 1080/59.94i, 50i, 29.97P, 25P
1920 × 1080/59.94i, 50i, 29.97P, 25P
1280 × 720/59.94P, 50P
Note
When the system frequency is 23.98P, input/output of
DVB-ASI TS signals is impossible.
Video codec
MPEG-2 MP@HL (manual mode)
MPEG-2 MP@H-14 (HDV-compliant mode)
Audio codec
MPEG-1 Layer2: 2 channels, 48 kHz, 384 kbps
MPEG-2 Layer2: 4 channels, 48 kHz, 384 kbps
Auxiliary packet
AUX1, AUX2: For HDV-compliant mode
When in manual mode, metadata can be output to the
AUX1 packet.
Bit rate selection range
15.00 Mbps to 43.25 Mbps (in steps of 0.01 Mbps)
Menu settings
Setting the number of audio output channels for DVB-
ASI TS signals: Setup menu item 831 TS OUT
AUDIO MODE
Switching DVB-ASI input/output and setting various
items: Setup menu item 926 DVB-ASI SETTING

About DVB-ASI Input/Output (When the Optional PDBK-202 Is Used)

105