Disconnect; Reassociate; Dhcp Release; Dhcp Renew - Honeywell 7850LP-I1-5210E - Hand Held Products Dolphin 7850 User Manual

LIST_NETWORKS
Lists configured networks. Fields are separated by a "/" character.
For example:
network id / ssid / bssid / flags
0 example network any [CURRENT]
SELECT_NETWORK
Selects a network (disable others). Network ID can be received from the
command output.
ENABLE_NETWORK
Enables a network. Network ID can be received from the
put.
REMOVE_NETWORK
Removes a network. Network ID can be received from the
put.
SAVE_CONFIG
Saves the current configuration.

DISCONNECT

Disconnects and wait for REASSOCIATE command before connecting.

REASSOCIATE

Forces the current connection to reassociate.

DHCP release

Releases the current IP address.
Running this command performs the same function as tapping Release IP on the

DHCP renew

Contacts the DHCP server to obtain a new IP address.
Running this command performs the same function as tapping Release IP on the

RADIO off

Disables the WLAN radio.

DEBUG on

Enables debug mode.
4 - 4
LIST_NETWORKS
LIST_NETWORKS (page 4-4) command out-
LIST_NETWORKS
(page 4-4)
(page 4-4) command out-
IP Tab (page 4-1).
IP Tab (page 4-1).