Common Configurations; Wep - Honeywell 7850LP-I1-5210E - Hand Held Products Dolphin 7850 User Manual

Common Configurations

This section contains some of the most common network configurations in detail, including:
•

WEP

(see page 1-13)
• PEAPv1-MSCHAPV2
• WPA-PSK (see page 1-14)
WEP
When you select WEP as the association mode, you can select Open encryption for no authentication or
encryption or Shared encryption to authenticate via a specific key.
1. On the Today screen, tap the icon in the command bar
2. Tap the Config tab.
3. Tap New.
4. On the Network window, type in the SSID.
5. Select WEP as the Assoc. Mode.
6. You have a choice of Encryption methods:
Encryption=OPEN
• In fields Key 1—Key 4, enter the key.
The format of each key must match the Key Length and Key Type you selected in Step 6. The
SWC validates the key length and will not let you save a key in the wrong format.
To use dynamic keys in your configuration, leave all the key fields blank.
• Tap OK and you are returned to the Config tab.
7. On the Config tab, select the network in the list and tap Activate.
8. The terminal begins connecting.
9. When connected, the
(see page 1-14)
Status Tab (page 1-17) appears displaying the results.
.
Encryption=SHARED
1 - 13