Chapter 3 - Setting Up The Wlan Swc With Deviceconfig; Overview; Configuring The Deviceconfig.exm File - Honeywell 7850LP-I1-5210E - Hand Held Products Dolphin 7850 User Manual

3
Setting up the WLAN SWC with DeviceConfig

Overview

You can use the DeviceConfig Power Tool to configure the SWC. Simply configure the DeviceConfig.exm
file with the SWC's settings, save it to the
When you enable the WiFi radio, the SWC will connect according to the settings in the DeviceCon-
fig.exm file.

Configuring the DeviceConfig.exm File

On your workstation or your terminal, open the DeviceConfig.exm file in EZConfig. The following instruc-
tions show the workstation method.
1. Click Start > All Programs > Honeywell > Dolphin Power Tools and Demos > EZConfig Editor.
2. Tap the Open icon
3. Right-click and select Enable on the following sections: Radio Manager > WiFi > Security >
Supplicant > Profile 1.
The WiFi section is disabled by default. Enabling this section turns the 802.x radio on at startup.
4. Select the Profile 1 section.
\IPSM\Autoinstall
and select the DeviceConfig.exm file.
folder and cold boot the Dolphin terminal.
3 - 1