Honeywell 7850LP-I1-5210E - Hand Held Products Dolphin 7850 User Manual page 13

IEEE 802.1X (WEP)
Available EAP Methods
IEEE 802.1X (WEP) (page 1-9) and
support the following EAP methods:
• LEAP
• PEAPv0-MSCHAPV2
• PEAPv1-MSCHAPV2
• PEAPv1-GTC
• PEAPv1-TLS
• FAST-MSCHAPV2
• FAST-GTC
• FAST-TLS
• TLS
• TTLS-MD5
• TTLS-MSCHAPV2
• TTLS-GTC
Completing the EAP Fields
Depending on the EAP method selected, the following fields (may) appear or disappear based on what
the selected protocol requires or offers for its configuration:
Field
Identity
Password
Anonymous ID
CA Cert. & Client
Cert.
Private Key
Priv Key Pass
WPA-Enterprise (EAP) & WPA2-Enterprise (EAP)
Description
This is the 802.1X identity supplied to the authenticator. The identity value
can be up to 63 ASCII characters and is case-sensitive.
This is the password used for MD5-Challenge or EAP authentication. It may
contain up to 63 ASCII characters and is case-sensitive. Asterisks appear
instead of characters for enhanced security.
Enter the anonymous ID. This ID creates a tunnel through which the real ID
(as entered in the Identity field) can pass. For additional security, make this
ID different than the one entered in the Identity field.
Tap the Browse button to load a CA or Client certificate located on the
terminal .
• CA certificates are any certificates created by a certified authority (CA).
• Client certificates contain information that identifies the user, as well as information
about the organization that issued the certificate. This ensures that you can encrypt
data end-to-end.
Tap the Browse button to load a private key located on the terminal
If you have loaded a private key, enter the password that unlocks the private
key.
(page 1-12)
.
1 - 9