Using Windows Vista; Printing A Network Setup Page; Changing Dhcp Settings - Dell V505 All In One Inkjet Printer User Manual

14. Follow the instructions on the installation screen to complete setup.

Using Windows Vista

To configure your printer on the wireless network using WPS, you may use Windows Vista™ instead of the Push-Button or PIN
methods. For more information about using Windows Vista, see the documentation that came with your operating system.

Printing a Network Setup Page

To find your printer IP address and other wireless network settings like your SSID, BSS Type and wireless security mode,
print a network setup page.
1. From the main menu of the printer operator panel, press the left or right Arrow button
and then press the Select button
2. Press the left or right Arrow button
3. Press the left or right Arrow button
Follow the instructions on the printer display. The Network Setup Page prints.
The IP address of the adapter is labeled Address: under the TCP/IP heading.

Changing DHCP Settings

The Dynamic Host Configuration Protocol (DHCP) automatically assigns IP addresses, subnet masks and default gateway. You
need to disable the DHCP from the operator panel to manually assign an IP address.
1. From the main menu, use the left and right Arrow buttons
button .
2. From the Setup menu, use the left and right Arrow buttons
Select button
3. Use the left and right Arrow buttons
.
.
to scroll to Network Setup, and then press the Select button
to scroll to Print Setup Page, and then press the Select button
to scroll to SETUP, and then press the Select
to scroll to TCP/IP Menu, and then press the Select button
to scroll to Network Setup, and then press the
to scroll to Setup,
.
.
.