Mode Selection - Sharp VC-FH70GM Operation Manual

ADVANCED OPERATION

MODE SELECTION

1.
MENU
SHOW V I EW
T I MER
MODE
SET UP
: SELECT
SET : ENTER
2.
¡
N I CAM
CO L OUR
B L U E MU T E
R E P E A T
AUD I O M I X
1 6 : 9
: S E L E C T
S E T : E N T E R
REPEAT.
If you want to playback repeatedly an entire video tape, this feature will
automatically rewind at the end of the tape and replay. This function enables or disables this
feature.
AUDIO MIX.
When this function is switched ON the VCR will playback both Hi-Fi and Mono
audio tracks.
16:9 PLAYBACK AND RECORDING.
This feature allows the PLAYBACK and RECORDING of wide screen format signals (16.9) which
should automatically change the picture size setting on a wide screen TV. To allow the
operation of this feature, ensure 16:9 mode is set to AUTO in the MODE menu.
A scart connection must be used between the VCR (SOCKET L1) and the TV.
During PLAYBACK of a 16:9 encoded tape the TV should switch to (Widescreen) 16:9 mode.
NOTES:
• Not all pre recorded tapes are compatible with 16:9 playback.
• This feature must be supported by TV's equipped with 16:9 switching.
• 16:9 format recording can only be made from L2 scart input.
• Standard Play (SP) gives the best picture quality; long play (LP) provides the longest
recording time.
MENU : EX I T
AU T O O F F
AU T O P A L
AU T O O F F
ON O F F
ON O F F
AU T O O F F
: CHANGE
ME NU : E X I T
Press MENU to display the main menu on the
screen. The main menu has four options
including MODE.
1.
To access the mode menu highlight MODE
using the [
SET .
2.
Highlight the option to be changed using
the [ / ] buttons. Press [
select AUTO, ON or OFF as appropriate,
SET
press then
normal screen.
NICAM. Selecting OFF will disable the
NICAM sound reception.
COLOUR.
If the VCR is playing a poor quality
recording, the picture may turn black and
white. Selecting PAL or MESECAM may reduce
this (depending on the recording), although
coloured speckles will appear on black and
white recordings.
BLUE MUTE. This enables the blue
background colour. That is, the TV screen will
be blue if a TV channel with no signal is
selected, an unrecorded section of tape is
played or the quality of the recording on the
tape is poor. Select OFF to disable this feature.
GB-29
/ ] buttons, then press
/
MENU
to return to the
] to