Table of Contents
Advertisement
INSTALLING YOUR VCR
CONNECTING THE CABLES
Connect the VCR to the
mains
Optional:
Satellite receiver or decoder to
the VCR using a scart lead to
LINE 2 IN/DECODER
socket on the VCR.
DECODER UNIT
OR SATELLITE SYSTEM
•
Do not connect a SCART lead if you wish to tune the VCR RF channel, depending on your
TV.
•
To obtain stereo sound output, connect your stereo TV to the AUDIO OUT terminals using
audio phono leads or to the LINE 1 IN/OUT terminal using SCART leads as shown.
•
Sound from RF OUT terminal is MONO only.
•
If your TV has more than 1 SCART socket, refer to your TV operation manual for correct
SCART connection to the VCR.
•
For
TV
LINK operation, a fully wired scart cable must be used.
NEX
IEW
3
Connect your
✔
The VCR is correctly connected.
Connect your existing aerial
cable to the
socket on your VCR.
2
Connect your TV
to the VCR using
the supplied rf
connection cable,
i.e. connect the
VCR
RF OUT
socket to the TV
AERIAL IN
socket.
Optional
SCART (not supplied). If you
have a scart lead connect it to your TV and
LINE 1 IN/OUT
socket on the VCR.
GB-4
AERIAL OR
CATV CABLE
1
ANTENNA IN
BACK OF
TELEVISION
Advertisement
Table of Contents
