Auto Installation - Sharp VC-FH70GM Operation Manual

INSTALLING YOUR VCR

AUTO INSTALLATION

SATELLITE RECEIVER / CABLE BOX CONTROL
If you have a satellite receiver or cable box connected to your VCR you can automatically
install the satellite channels using this feature. The installation procedure for cable boxes is the
same as for satellite receivers (for cable box connections refer to your cable box manual).
Follow steps 1-4 below before INSTALLATION PROCEDURE:
1.
Connect your satellite receiver to the VCR as previously shown.
2.
Place the satellite receiver near the VCR (ideally on the top). This ensures that the
reflected infrared signals from the VCR which control the satellite receiver can reach it
unimpeded.
3.
Ensure all the channels you wish to be tuned are within channel positions 1-199 on your
satellite receiver as the VCR will only tune the first 199 channels - refer to your satellite
receiver operation manual for instructions on moving channels.
4.
Ensure the receiver is not in any special mode.
• The satellite channels can now be tuned in as part of the auto-installation procedure.
You will be prompted for further information from the on-screen displays.
• SHARP cannot guarantee this feature will work with all satellite receivers and cable
boxes.
• See the list of satellite receiver manufacturers codes at the end of this manual.
All information relevant to satellite receiver control will display this symbol.
INSTALLATION PROCEDURE
These models automatically tune the TV channels for your area, then using Teletext
information sort the TV channels into a standard order and set the clock.
• Ensure the VCR is connected as previously shown.
• Turn the TV on and select the video channel.
• Press STOP to switch on your VCR.
If the VCR has not previously been tuned-in,
instructions will be given on screen to guide
you through this procedure.
If the screen opposite appears when the video
is first switched on, press SET to confirm and
start from point 4 on the next page.
If the screen opposite does not appear when
the video is first switched on, start from point 1
on the next page.
AU T O I N S T A L L A T I ON
P R E S S S T AR T K E Y T O S T AR T .
AU T OMA T I S CH E E I N S T E L L UNG
Z UM B EG I NN, D I E S E T - T A S T E
DRÜCK E N.
S E T : E I NGAB E ME NU : E ND E
GB-6