Table of Contents
Advertisement
BASIC OPERATION
DIRECT TV RECORDING
This feature can only be used with
Link and Megalogic compatible tv's.
By pressing the
DIRECT TV REC
signal currently being displayed on the TV regardless of the signal source.
This feature can be started when the VCR is in STANDBY or OPERATE mode, but NOT
POWERSAVE mode.
•
If
appears on the VCR display, press
•
Ensure a video tape is inserted in the VCR.
1.
To start the recording, press
2.
To pause during recording, press
3.
To continue recording, press
4.
To stop recording, press
NOTES:
•
A fully wired scart must be used for DIRECT TV RECORD operation.
•
If DIRECT TV RECORD could not start, the TV should indicate the reason why.
(Refer to the TV operation manual).
TIMER RECORDING
It is possible to program the VCR using three different methods:-
1.
TV
NEX
IEW
2.
SHOWVIEW
3.
MANUALLY (DELAYED RECORDING)
HOW TO USE
•
If
appears on the VCR display, press
•
Check that the clock is displaying the correct time.
Some broadcasts transmit an Electronic Program Guide (EPG) in which case, using the TV con-
trols, the program you wish to record can be selected and used to program the VCR automat-
ically. This feature is compatible with
information. After transfer of the timer information to the VCR, the timer menu will be displayed
for approximately 5 seconds, after which press
STANDBY mode.
NOTES:
•
The timer menu will not be displayed if this procedure is carried out while the VCR is in
STANDBY mode.
•
VPS/PDC is a signal broadcast by some TV stations which adjusts the start and stop time
of your VCR recording. This ensures that if there is a change in broadcast time for your
programme the VCR will still record the whole programme. It is essential that the start
time as it appears in the TV listing is used to program the VCR, as this information is used
to identify the VPS/PDC signal corresponding to your programme.
•
If
flashes a video tape has not been inserted into the VCR.
•
During recording, press STOP (
ings to be made, the VCR will return to TIMER STANDBY.
button on the remote control, the VCR will record the
DIRECT TV REC
PAUSE
REC
(
STOP
(
).
TV
NEX
IEW
TV
NEX
will be shown on the display.
) to cancel the recording. If there are further record-
TV
NEX
TIMER ON/OFF
.
(
).
).
TO MAKE A RECORDING
TIMER ON/OFF
TV's. Refer to your TV operation manual for further
IEW
TIMER ON/OFF
GB-13
, Smart Link, Easy
IEW
before starting.
before starting.
once to place the VCR in
Advertisement
Table of Contents
