Panel Explanation - Draytek VigorIPPBX 3510 Series Quick Start Manual

1 . 1 P a n e l E x p
1 . 1 P a n e l E x p
D e s c r i p t i o n f o r
D e s c r i p t i o n f o
LED
PWR (Power)
ACT (Activity)
WAN
CDR
USB
MSF
VPN
CSM
QoS
LED on Connector
Left LED
LAN 1/2/3/4*
(Green)
Right LED
(Green)
Left LED
WAN1/2*
(Green)
Right LED
(Green)
* LAN 4 and WAN 2 share the same connector.
VigorIPPBX 3510 Quick Start Guide
l a n a t i o n
l a n a t i o n
L E D
r L E D
Status
On
Off
Blinking
Off
On
Blinking
On
Off
On
Blinking
Blinking
On
On
On
On
Off
Blinking
On
Off
On
Off
Blinking
On
Off
Explanation
The router is powered on.
The router is powered off.
The router is powered on and running normally.
The router is not ready or failed.
The WAN connection is ready.
It will blink while transmitting data.
CDR utility has been installed and is recording.
CDR utility has not been installed and is unable to
record.
A USB device is connected and active.
The data is transmitting.
Storage (NAND flash or USB disk) is full.
The VPN tunnel is active.
The profiles of CSM (Content Security Management)
for IM/P2P, URL Content Filter, Web Content Filter
application is enabled from Firewall >> General
Setup. (These profile can be established under CSM
menu).
The QoS function is active.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is connected with 10Mbps.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 100Mbps.
The port is connected with 10Mbps.
2