Draytek VigorIPPBX 3510 Series Quick Start Manual
Dual-wan broadband router with ip pbx function
Hide thumbs
Also See for VigorIPPBX 3510 Series:
- Technical specifications (7 pages) ,
- User manual (265 pages) ,
- User manual (269 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Draytek VigorIPPBX 3510 Series
Summary of Contents for Draytek VigorIPPBX 3510 Series
- Page 1 VigorIPPBX 3510 Quick Start Guid...
- Page 2 VigorIPPBX 3510 Quick Start Guide...
-
Page 3: Quick Start Guide
VigorIPPBX 3510 Quick Start Guide Version: 2.0 Date: 19/11/2010 VigorIPPBX 3510 Quick Start Guid... -
Page 4: Copyright Information
Web registration is preferred. You can register your Vigor router via Owner http://www.draytek.com. Firmware & Tools Due to the continuous evolution of DrayTek technology, all routers will be Updates regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents. -
Page 5: European Community Declarations
Taiwan 303 Product: VigorIPPBX 3510 DrayTek Corp. declares that VigorIPPBX 3510 is in compliance with the following essential requirements and other relevant provisions of R&TTE Directive 1999/5/EEC. The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC by complying with the requirements set forth in EN55022/Class A and EN55024/Class A. - Page 6 VigorIPPBX 3510 Quick Start Guide...
-
Page 7: Table Of Contents
1. Introduction......................1 1.1 Panel Explanation ........................2 1.2 Package Content........................4 2. Installing Your Router................... 5 2.1 Hardware Installation........................5 2.2 Printer Installation........................6 3. Configuring Web Pages ..................11 4. Trouble Shooting ....................17 4.1 Checking If the Hardware Status Is OK or Not................. 17 4.2 Checking If the Network Connection Settings on Your Computer Is OK or Not ...... - Page 8 VigorIPPBX 3510 Quick Start Guide viii...
-
Page 9: Introduction
The VigorIPPBX 3510 is a dual-WAN broadband router with IP PBX function. The 2 WAN interface is shared with the 4 LAN port. These two WANs can connect to DSL/Cable modem or fiber media converter for policy-based load-balance, fail-over and BoD (Bandwidth on Demand);... -
Page 10: Panel Explanation
Status Explanation PWR (Power) The router is powered on. The router is powered off. ACT (Activity) Blinking The router is powered on and running normally. The router is not ready or failed. The WAN connection is ready. Blinking It will blink while transmitting data. CDR utility has been installed and is recording. - Page 11 Interface Description Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. When you see the ACT LED begins to blink rapidly than usual, release the button. Then the router will restart with the factory default configuration. Connecter for telephone set.
-
Page 12: Package Content
Quick Start Guide RJ-45 Cable (Ethernet) Rack mount kit (brackets) FXO (optional) FXS (optional) The type of the power cord depends on the country that the router will be installed. UK-type power cord EU-type power cord USA/Taiwan-type power cord AU/NZ-type power cord China-type power cord VigorIPPBX 3510 Quick Start Guide... -
Page 13: Installing Your Router
This section will guide you to install the router through hardware connection and configure the router’s settings through web browser. Before starting to configure the router, you have to connect your devices correctly. Connect the cable Modem/DSL Modem/Media Converter to WAN port of router with Ethernet cable (RJ-45). -
Page 14: Printer Installation
You can install a printer onto the router for sharing printing. All the PCs connected this router can print documents via the router. The example provided here is made based on Windows XP/2000/Vista. For Windows 98/SE, please visit www.draytek.com. Before using it, please follow the steps below to configure settings for connected computers. - Page 15 Open File->Add a New Computer. A welcome dialog will appear. Please click Next. Click Local printer attached to this computer and click Next. In this dialog, choose Create a new port Type of port and use the drop down list to select Standard TCP/IP Port.
- Page 16 In the following dialog, type 192.168.1.1 (router’s LAN IP) in the field of Printer Name or IP Address and type IP_192.168.1.1 as the port name. Then, click Next. Click Standard and choose Generic Network Card. Then, in the following dialog, click Finish. VigorIPPBX 3510 Quick Start Guide...
- Page 17 Now, your system will ask you to choose right name of the printer that you installed onto the router. Such step can make correct driver loaded onto your PC. When you finish the selection, click Next. 10. For the final stage, you need to go back to Control Panel-> Printers and edit the property of the new printer you have added.
- Page 18 If you do not know whether your printer is supported or not, please visit www.draytek.com to find out the printer list. Open Support >FAQ; find out the link of Printer Server and click it; then click the What types of printers are compatible with Vigor router? link.
-
Page 19: Configuring Web
To access Internet, please finish basic configuration after completing the hardware installation. The Quick Start Wizard is designed for you to easily set up your router for Internet access. You can directly access the Quick Start Wizard via Web Configurator. Make sure your PC connects to the router correctly. - Page 20 Note: The home page will change slightly in accordance with the router you have. Enter the login password on the field of New Password and retype it on the field of Confirm Password. Then click Next to continue. On the next page as shown below, please select the WAN interface (WAN 1 or WAN2) that you use.
- Page 21 On the next page as shown below, please select the appropriate Internet access type according to the information from your ISP. For example, you should select PPPoE mode if the ISP provides you PPPoE interface. Then click Next for next step. PPPoE: if you click PPPoE or PPPoA as the protocol, please manually enter the Username/Password provided by your ISP.
- Page 22 PPTP/L2TP: if you click PPTP/L2TP, you will get the following page. Please type in all the information originally provided by your ISP. Then click Next for next step. Static IP: if you click Static IP, you will get the following page. Please type in the IP address information originally provided by your ISP.
- Page 23 DHCP: if you click DHCP, you will get the following page. Simply click Next to continue. Now you can see the following screen. It indicates that the setup is complete. Different types of connection modes will have different summary. Click Finish and then restart the router.
- Page 24 This page is left blank. VigorIPPBX 3510 Quick Start Guide...
-
Page 25: Trouble Shooting
This section will guide you to solve abnormal situations if you cannot access into the Internet after installing the router and finishing the web configuration. Please follow sections below to check your basic installation status stage by stage. Checking if the hardware status is OK or not. Checking if the network connection settings on your computer are OK or not. - Page 26 The example is based on Windows XP. As to the examples for other operation systems, please refer to the similar steps or find support notes in www.draytek.com. Go to Control Panel and then double-click on Network Connections. Right-click on Local Area Connection and click on Properties.
- Page 27 Select Obtain an IP address automatically and Obtain DNS server address automatically. Double click on the current used Mac OS on the desktop. Open the Application folder and get into Network. On the Network screen, select Using DHCP from the drop down list of Configure IPv4.
-
Page 28: Pinging The Router From Your Computer
The default gateway IP address of the router is 192.168.1.1. For some reason, you might need to use “ping” command to check the link status of the router. The most important thing is that the computer will receive a reply from 192.168.1.1. If not, please check the IP address of your computer. -
Page 29: Checking If The Isp Settings Are Ok Or Not
Open Internet Access page and then check whether the ISP settings are set correctly. Check if the Enable option is selected. Check if Username and Password are entered with correct values that you got from your ISP. VigorIPPBX 3510 Quick Start Guide... - Page 30 Check if the Enable option is selected. Check if Obtain an IP address automatically for Dynamic IP setting is selected. Or check if IP address, Subnet Mask and Gateway are entered with correct values for Static IP setting that you got from your ISP. Check if the Enable option for PPTP/L2TP Link is selected.
-
Page 31: Backing To Factory Default Setting If Necessary
Sometimes, a wrong connection can be improved by returning to the default settings. Try to reset the router by software or hardware. Warning: After pressing factory default setting, you will loose all settings you did before. Make sure you have recorded all useful settings before you pressing. -
Page 32: Contacting Your Dealer
If the router still cannot work correctly after trying many efforts, please contact your dealer for further help right away. For any questions, please feel free to send e-mail to support@draytek.com. VigorIPPBX 3510 Quick Start Guide...