Draytek VigorPhone 350 Quick Start Manual page 7

Frequently Use Phone Commands
Items Method
Answering a An incoming call is indicated by a ringing tone and a red light on the incoming call
Call indicator. You can answer the call by doing one of the followings:
1. Pick up the handset to answer the call.
2. Press the Headset key on the phone to answer the call.
3. Press the Speaker key on the phone to answer the call.
4. Press the Line 1 / Line 2 on the phone to answer the call.
* You may also set "Auto Answer" to pick first in progress call automatically.
Making a Call Dialing with the Keypad
1. Enter the telephone number with the alphanumerical keypad, as shown below. If you
enter an incorrect digit, press the Delete/Clear soft key to erase the incorrect digit.
2. After entering the number you want to call, press the # key to force dialing or wait for
4 seconds (default value) before the number is dialed automatically.
Looking up a Number from the Phone Book
You can call your contacts using the contact information stored in the phone book. To
make a call to a person from the phone book, follow the steps below:
1. Press the Menu key to display the menu options.
2. Select Phone Book and press the Enter key to display your phone book.
3. Scroll through the list until you find the contact you want to call.
Select the entry you want to make the call, and press the Dial soft key or pickup
handset/headset to make the call.
Making a Call You can also make a call to an IP address by inputting the IP address with the keypad.
(For example: 192*168*1*100)
to an IP
Address
In order to make a SIP call, the phone must be registered to a SIP server. If there is more
Making a Call
than one account registered, you can use 4-way Navigation keys "up" or "down" to select
to SIP Server
an account first.
Speed/BLF You can use the speed dial hotkeys, located on the right side of the phone, to configure the
(Busy Lamp most commonly dialed numbers. Use the function to dial a number quickly, instead of
Field) keying in a complete number.
To call a number using speed dialing, follow the steps below:
Dialing to This Phone allows two simultaneously SIP calls at the same time.
Multiple SIP
You can use line buttons (LINE 1 and LINE 2) to make/receive/switch two calls. Each
Accounts
line button has a LED back light to help user identify line status as follows:
•
•
•
For example:
First Call: Dialing by LINE1 button or using handset/headset or speaker.
Second Call: Dialing by LINE2 button or press "Hold" key to put the first call on
hold.
Each of the line bottom (LINE 1 or LINE 2) is represented with a virtual SIP channel.
By default, outgoing call uses the first VoIP account. You can switch to another account
by pressing the navigation key up and down.
•
Press the speed dial memory hotkey (1~16) that has been assigned to the phone
number from the numeric keypad.
Green light means "dialing" status
Red light means "occupied / Ring" status
Green light blinking means "Hold" Status
For example:
Configure ACCOUNT1 and ACCOUNT 2 with Registration ID as "VoIP1",
"VoIP2" respectively and ensure that they are active and registered. If the first
VoIP1 is selected, all calls will go through VoIP1.
- 7 -