Item
Name
Trans.(Transfer)
Conf.(Conference)
Schdl.(Schedule)
ACK (acknowledge)
Select
Edit
Back
Save
Apply
Info.(Information)
Function Keys
LINE 1 / LINE 2
HOLD
REDIAL
12
Volume control keys
Item.
Name
1
Handset Jack
2
Headset Jack
3
LAN/ PoE Port
4
PC Port
5
Power Jack
Description
Press to transfer a call.
Press to initiate a conference call.
Press to create, view, edit, or delete schedule.
Press to acknowledge event notice.
Press to apply setting.
To edit the selected item.
To go back to the previous level.
Save the related information.
To save and apply changes.
Press to view settings of the selected option.
There are two LINEs bottons in this IP Phone. Each line represented a
SIP call for the following status:
- The line is not used the line stays no lights.
- Dialing a call, the selected line key lights on steady green If a call has
sent Green lights off and turns on steady red light.
* When an existing call has been put on hold, the represented button
will light up in green.
Press to put an active call on hold.
Press to call from call history dialed Calls.
Press to increase or decrease the volume of the ringer tone or talking
volume in handset, handset, or speakerphone.
Description
Connects to the phone. RJ-9
Connects to an external headset.RJ-9
Connects to LAN cable. 10/100Mbps RJ-45 port for LAN (uplink)
connection. If you are using Power over Ethernet (PoE), the power to
the phone is supplied when you connect the Ethernet cable. Draws
power from either spare line or signal line.
Connects to PC. 10/100Mbps RJ-45 port for PC (downlink)
connection.
Connects to AC power adapter. 12V DC power port.
- 4 -