General Setup - Draytek VIGOR2820 series Quick Start Manual

3 . 2 . 2 G e n e r a l S e
3 . 2 . 2 G e n e r a l S e
1. On the Wireless LAN group, select General Setup. The following page will be
shown as below.
2. Check Enable Wireless LAN to enable the wireless function.
3. At present, the router can connect to 11b+11g, 11g Only, 11b Only, 11n Only and
Mixed (11b+11g+11n) stations simultaneously. Simply choose Mix (11b+11g+11n)
mode.
4. Type in the name of the SSID. The default name for SSID is default. We suggest
you change it to a particular name for your necessity.
SSID (service set
identifier)
5. The default channel is 6. You can change it to an appropriate one if the selected
channel is under serious interference.
t u p
t u p
It is used to name the wireless LAN for this router, and it must
have the same content in client PC/notebook wireless card(s).
SSID can be any text numbers or various special characters.
28
Vigor 2820 Series Quick Start Guide