Saving & Reusing Search Data - Honeywell RAPID EYE MULTI-MEDIA Operator's Manual

View: Operator Guide
5.7 Saving & Reusing Search Data
You can save the:
5.7.1 Repeating a Motion Search
! ! ! ! 68 To save the date, time, mask, motion options
1.
2.
3.
! ! ! ! 69 To reuse a date and time for a motion search
1.
2.
3.
4.
5.
6.
Reusing settings on the same video generates the same motion detection report.
For a different report, change the motion options, the date and time or both.
5.7.2 Using a Report
A motion search report can be saved as a text file, then opened using a word processor,
for further enhancement.
! ! ! ! 70 To Save a motion Report as a text file
1.
2.
3.
You have the option of filtering the magnitudes and/or trimming the report before
saving it as a text file. Only the items in the list are saved.
5–16
date and time for a motion search and its motion detection options for reuse.
- and/or -
lists of movement found in the video or edited lists, for further use with word
processing software or spreadsheets.
You have the option of saving all preparation settings by clicking Save Cfg
("save the configuration settings"). A dialog appears for saving the information
as a computer file.
Type a filename and select a folder, as needed.
Click OK. The information is saved in a file that has a .rmc extension.
In a Motion Search session, click the arrow in the Stream box to display a list of
the site's cameras. You can see the arrow in figure 38 on p. 5–2.
Select a camera from the Stream list.
Click Load Cfg ("load the configuration settings"). A dialog appears for
selecting a computer file.
Select a file with a .rmc extension, and folder as needed.
Click OK.
Click Fetch, and then click Search.
After obtaining a motion search report, click Save. A dialog appears for saving
the information as a computer file.
Type a filename and select a folder, as needed.
Click OK.