Honeywell RAPID EYE MULTI-MEDIA Operator's Manual page 30

View: Operator Guide
Table 4
Resolution legend: NTSC camera (pixel × pixel).
resolution gauge n/a
resolution
* Not shown when connected to Multi-Media LT units.
PAL resolutions: Multi-Media
Table 5
Dynamic resolutions for PAL cameras
* Use procedure !28, below on p. 2–14, to identify a Multi-Media unit's processor.
†
Not available on Multi-Media LT units, except during maximal zoom of one video feed
while using LocalView.
Table 6
Resolution legend: PAL camera (pixel × pixel).
resolution gauge
resolution (pixel × pixel)
* Not available on Multi-Media LT unit.
Multi-Media unit's processor
! ! ! ! 28 To identify a unit's processor
1.
2.
3.
If you have access to the unit, you can interpret the unit's processor from the message
displayed on the unit's blue screen, by using table 7.
2–14
legacy 160×120
unit processor (CPU)
type*
Pentium 4 (P4)
Pentium 3 (P3)
P3 running older software
Continue or start a maintenance session for the Rapid Eye site.
Click the Hardware tab. Next to Main Board, the unit's central processing unit
(CPU) is listed—P4, P3 and so on.
You have the option of ending the maintenance session.
320×240 640×240
resolution (pixel × pixel)
192×144 384×288
* *
* *
*
192×144 384×288
640×480* 704×480*
†
704×288 704×576
* *
< =
< = unavailable
704×288 704×576*