Honeywell RAPID EYE MULTI-MEDIA Operator's Manual page 53

! ! ! ! 52 To focus motion search on an area of a video feed's picture
1. After preparing a motion search, as explained in 5.2, Preparation, click
the Show / Hide mask button. You have the option of clicking
the Show / Hide masking grid button.
2. On the larger image, click where you need the motion search to occur. Blocks
appear as you click on the image. You can click as many times as needed. See
figure 42.
! ! ! ! 53 To remove a block in a mask
Click the block.
! ! ! ! 54 To view more masking commands
Place the mouse pointer on the large video image of a motion session and
right-click. A menu appears, showing global masking commands. See
figure 42.
Fig. 42. Enlarged detail of image used during a motion search.
Searching for Motion
,
,
5–5