Honeywell RAPID EYE MULTI-MEDIA Operator's Manual page 26

View: Operator Guide
Table 2
Microsoft Windows: Display Properties, Settings
Screen area
(pixels)
1600 by 1200
1280 by 1024
1152 by 864
1024 by 768
800 by 600
640 by 480
* Video can still be viewed and worked with by using smaller screen area settings; see
figure 15.
! ! ! ! 25 To change a PC monitor's Refresh Rate
1.
2.
3.
4.
5.
6.
7.
8.
Higher refresh rates can alleviate eye fatigue when monitoring video over time.
Not all monitors and video cards support the recommended resolutions or offer various
refresh rates. Consult the documentation supplied with your monitor and video card.
Recorded video
For recording video, your organization's Multi SA sets a resolution, depending on
storage and application needs. Resolution settings for recorded video are discussed in
the Admin user guide, K5403. The flexibility of setting resolutions independently for
recording video contributes to optimal system performance.
The setting for the resolution of recorded video does not change when live video
alters its resolution on-the-fly.
2–10
Recommended by Honeywell
for viewing higher video resolutions
yes
yes
no
no
no
no
On the Microsoft Windows' desktop, click Start. A list of menus appears
showing the Settings menu.
Click Control Panel on the Settings menu. A Control Panel window appears.
Click the Display icon, in the Control Panel window. The Display Properties
window appears.
Click the Settings tab, in the Display Properties window.
Click Advanced..., on the Settings tab. It takes a few seconds before a
General tab and others are displayed in another window.
Do one of the following:
Click the Monitor tab. You can change the Refresh Frequency, as needed.
Click the Adapter tab, then click List All Modes.... You can change the refresh
rate (Hertz) along with a screen area with one click, as needed.
Click OK. The tabs for advanced settings disappear and the Display Properties
window is shown.
Click Close. For some settings, you need to restart your computer.