Table of Contents
Advertisement
P
M
RINTING
ANUALLY
You can print manually from the Multipurpose tray as long
as you select Manual Tray for your paper source. Manually
loading paper can be helpful when you want to check print
quality after each page. You load paper sheet-by-sheet, send
the print data from your application, and then press the Go/
Continue button to print each page
1.
Load media in the Multipurpose tray print side up (A).
2.
Adjust the Width Guide so that it lightly touches the side
of the stack (B).
A
Print-side up
note:
be referred to as Tray 1 or Manual
tray in the printer driver.
C
40
Chapter 5, Using Print Media
The Multipurpose tray will
3. Select Manual Tray in the Paper Source area of your
software application
(C)
4.
The Manual light on the Operator Panel will start
blinking (D). Press the Go/Continue button.
5.
After one page has printed, the Manual light will start
blinking again prompting you to feed the next sheet.
6.
Repeat this step for each page you want printed.
B
D
Select print from your screen.
Advertisement
Table of Contents
