Advertisement
iW
1
_.._ave you ever played hide and
• • seek with your remote
control? Are you tired of tearing
the house apart trying to find if
someone has stuffed the remote
under the couch, put it on the
shelves, or hid it in the desk? Well,
your TV remote can save you all
that looking by automatically
signaling its location to you.
Here's how it works:
< _.
Press the POWER button on
the set to turn the TV ON.
Note: Normally you can press any
button on the front of the TV to
turn the set ON. But for the remote
locator to work you need to be sure
to use the Power button at the TV.
A "locating remote" message
shows on the TV screen.
<_
Within a few seconds a
chirping or beeping sound will
begin to come from the remote
control hand unit.
The remote will continue to signal
its location for around 30 seconds.
Normal TV program sound will not
be heard while the remote locator is
working.
_Once
you find the remote just
press any button on the remote and
the beeping sound will stop.
The remote is now ready for
normal TV feature use.
0
Remember, the remote
locator may not properly
receive its "homing" signal from
the TV if it has been placed on a
metal shelf or counter fl_aterial.
Also, since there's a special type
of radio frequency "homing"
signal receiver inside the remote
we are required to notify you that
any changes or modifications not
expressly approved by Philips
Consumer Electronics Company
could void the user's authority to
_l._tate the remote equipment.
Your TV isattempting
to locatea lostremote
Remote Locator
range is around 30 Feet.
I[
STR
[]
÷
•
Is*A*°sl- i
A- vl ivoo II
32
Advertisement
