Advertisement
11 H1Tli] HHiiH
B il I_H_
uto-Programming
(see
previous page) adds all the
channels it can find (on your
Antenna or Cable TV system) into
the TV's memory. AddlDelete
Channels makes it easy for you to
add other channels, or drop
unwanted channels, from the list of
channels in the TV's memory.
Select CHANNEL
MEMORY
(ADD/DELETE
CHANNELS)
control.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU (M) 4,-)buttons.
Then press the MENU button.
<_
Press the CHANNEL AV or
number
buttons to select the
channel you want to add or delete.
_
Press the MENU
button to
ADD the channel into the TV's
memory.
Press the MENU • button to
DELETE the channel from
memory.
Repeat steps 2 and 3 for each
channel you wish to add or delete.
<_
Press the STATUS
MENU
or
button to clear the screen when
through.
O
Remember. You can also
add the AUX 1, AUX 2, or
AUX 3 modes just like a channel.
Then by pressing the CHANNEL
AY buttons theAUX(iliary)
mode can quickly be_t_lected to
use the desired set of l_put jacks
on the TV (see page 28).
Note: AUX 1, AUX 2, and AUX 3
modes are located between the
lowest and highest channel
numbers within the
ADD/DELETE CHANNEL
control screen.
MAIN
MENU
FEATURE MENU
10F5_
CHANNEL MEMORY --
t1_1.
I .I,#,
I!
. | CHANNELS
,,I,i,,,t,I,
START
rm
when FINISHED
NOTE: A separate ADD/DELETE CHANNEL memory
may also be created for the ANT(enna)
B Input on the
rear of the set (if an Antenna or Cable "IV signal has been
connected). Just press the _
button on the remote,
while in the ADD/DELETE CHANNEL mode, to switch
between the ANTA and ANT B channel memory lists.
Then follow steps 2 and 3 as shown to the left to add or
lelete the desired
channels.
14
Advertisement
