Advertisement
y adding optional external
speakers to the TV's sound
system, you can-create the feeling
of reflected sound that surrounds
you at a movie theater or concert
hall.
<_
Connect both external
speakers to the speaker wire
terminals on the TV.
Recommended speakers: 8ohm, 15
watt minimum. Be sure the (+) and
(-) speaker wires are connected to
the correct R(ight) and L(eft)
speaker terminals on the TV.
<_
Place the speakers
so the
viewing
area is between
the TV
and the rear surround
speakers.
(See overhead
view drawing.)
<_
Turn TV ON and place the
STEREO control to the "STEREO
IF AVAILABLE" (v,') position.
After setup whenever a stereo
signal is received the audio will be
heard in Surround Sound.
O
REAR SURROUND
SOUND
SPEAKER TERMINALS
BACK OF "IV
REAR SURROUND SOUND SPEAKERS
Note: The rear Surround Sound speakers will not
be heard at the same volume level as the front "IV
speakers. It is intended for the rear speaker_ to give
a background noise effect which requires a lower
volume level than the TV's front speaker*.
Remember,
Surround Sound
will not work with
only one speaker
connected; or with
monaural audio
material (unless
Stereo Surround
control is turned
ON - see Variable
Audio section
below).
REAR SPEAKER
REAR SPEAKER
PRIMARY VIEWING AREA
•
L
he TV's Variable Audio Output
cks can also be used for
Surround Sound. Once they are
connected to an external hi-fi
system its speakers can be used for
the playback of Surround Sound.
Connect the R(ight) and L(eft)
VARIABLE AUDIO OUT jacks
on the TV to the R and L Audio
Input jacks on your amplifier or
sound system.
<_
Turn TV ON and place the
VARIABLE AUDI_IOUTPUT
on
screen control to the SURROUND
(t,,*) position. (Sound Menu 3 of 3).
Note:This will change the
Left/Right channel audio line level
signal at the Audio Output jacks to
the same signal found at the TV's
Surround Sound Speaker terminals.
BACK OF TV
._..0_
AUDIO
INPUT
JACKS
VARIABLE AUDIO
OUTPUT JACKS
®®
AUDIO SYSTEM SPEAKERS USED AS REAR
SURROUND SOUND SPEAKERS
27
Advertisement
