Advertisement
VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified on the
nameplate of the tool. A power source with voltage greater than that specified
for the tool can result in SERIOUS INJURY t o the user
-
as well as damage t o
the tool.
If in
doubt,
DO
NOT PLUG
IN
THE TOOL. Using a power source with
voltage less than the nameplate rating is harmful t o the motor.
ADDITIONAL SAFETY RULES
1.
Use only Makita genuine driver bits and drywall screw strips specified for this
2.
Always be sure that the machine is switched off and unplugged before carrying
3.
Hold the machine firmly and squarely against the workpiece.
4.
Be sure n o one is below when using the machine in high locations.
5. Do not touch any metal parts of the machine t o prevent electrical shock if
6.
Never lubricate the moving parts such as the feeder box. Malfunction of the
machine.
out any work on the machine.
you drive into a "live" wire.
machine may result.
SAVE THESE INSTRUCTIONS.
4
Advertisement
