Makita 6835D Instruction Manual
Cordless auto feed screwdriver
Hide thumbs
Also See for 6835D:
- Instruction manual (60 pages) ,
- Instruction manual (25 pages) ,
- Instruction manual (14 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita 6835D
Summary of Contents for Makita 6835D
- Page 1 INSTRUCTION MANUAL Cordless Auto Feed Screwdriver 6835D 001872 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model 6835D Screw strip 4 mm x 25 mm - 41 mm No load speed (min 2,000 Overall length 364 mm Net weight 2.1 kg Rated voltage D.C. 12V • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. -
Page 3: Cordless Screwdriver Safety Warnings
medication. A moment of inattention while power tool repaired before use. Many accidents operating power tools may result in serious are caused by poorly maintained power tools. personal injury. 22. Keep cutting tools sharp and clean. Properly Use personal protective equipment. Always maintained cutting tools with sharp cutting edges wear eye protection. - Page 4 Do not touch the bit or the workpiece SAVE THESE INSTRUCTIONS. immediately after operation; they may be extremely hot and could burn your skin. Tips for maintaining maximum battery life Charge the battery cartridge before completely SAVE THESE INSTRUCTIONS. discharged. Always stop tool operation and charge the WARNING: battery cartridge when you notice less tool...
-
Page 5: Functional Description
FUNCTIONAL DESCRIPTION Number indicated on the plate Screw length range (mm) 25/28 25 - 28 28 -35 CAUTION: 35 -41 Always be sure that the tool is switched off and the • 006479 battery cartridge is removed before adjusting or Adjusting the driving depth checking function on the tool. - Page 6 Installing or removing the bit Removing screw strip Loosen the thumb screws which secure the casing. Pull To remove the screw strip, just pull it out in the direction out the casing in the direction of the arrow. of the arrow. 1.
-
Page 7: Operation
If you need any assistance for more details regarding Do not operate the tool without screws. It will • these accessories, ask your local Makita Service Center. damage the driving surface. Drywall screw strip • If the feeder box does not work smoothly when •... - Page 8 Makita Corporation Anjo, Aichi, Japan www.makita.com 884269F228...