Maintenance - Makita 9503BH Instruction Manual

MAINTENANCE
CAUTION :
Always be sure that the tool is switched off and unplugged before attempting to perform
inspection or maintenance.
Replacing carbon brushes
Remove and check the carbon brushes
regularly. Replace when tehy wear down
to about 4.5 mm (3/16") or less. Keep the
carbon brushes clean and free to slip in the
holders. Both carbon brushes should be
replaced a t the same time. Use only Makita
carbon brushes.
I
4.5
m m (3/16")
Use a screwdriver to remove the brush
holder caps. Take out the worn carbon
brushes, insert the new ones and secure
.
Brush holder cap
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or
adjustment should be performed by Makita Authorized or Factory Service Centers,
always using Makita replacement parts.
7