Page 1
INSTRUCTION MANUAL Angle Grinder 9500N 008435 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH SPECIFICATIONS Model 9500N Depressed center wheel diameter 100 mm Spindle thread No load speed (min 12,000 Overall length 245 mm Net weight 1.65 kg • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
handles dry, clean and free from oil and grease. Use only wheels with correct size and wheels 15. Disconnect tools. having a maximum operating speed at least as When not in use, before servicing and when high as the highest No Load Speed marked on changing accessories such as blades, bits and the tool's nameplate.
24. Do not use water or grinding lubricant. CAUTION: 25. Ensure that ventilation openings are kept clear Before plugging in the tool, always check to see • when working in dusty conditions. If it should that the tool is switched off. become necessary clear...
OPERATION Screw the inner flange onto the spindle. Fit the diamond wheel on over the inner flange and screw the lock nut onto the spindle. Notice that flat side of the lock nut WARNING: should face the diamond wheel in case the diamond It should never be necessary to force the tool.
Only use accessory or attachment for its stated purpose. 1. Limit mark If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Wheel guard (Wheel cover) • Inner flange • Depressed center wheels •...