Primary Belt And Blade Belt Inspection; Wear Or Damage; Blade Belt Tension - Honda HT-R3009 Owner's Manual

6. Primary belt and blade belt inspection
n Wear or damage
1. Move the P.T.O. lever to the OFF (Disengaged) position.
2. Lower the cutter deck as far as it will go with the cutter deck height ad-
justing lever.
3. Inspect both belts for wear and damage. If the belts are worn or damag-
ed, replace them according to the instrutions on pages 48 and 49.
I Blade belt tension
1. Move the P.T.O. lever to the ON (Engaged) position.
2. Raise the cutter deck as far as it will go with the cutter deck height ad-
justing lever.
3. If the index mark on the tensioner arm aligns with or goes inward past
the wear indicator on the cutter deck, adjust the belt tension according
to the instructions on page 47.
PRIMARY BELT
.,"I IL" ="A-
BLADE BELT
TENSIONER
ARM
'CUTTEER DECK
-
WiiR INDICATOR/k
21