Table of Contents
Advertisement
Removal
from
storage
1. Check the battery
electrolyte
level (see p. 22). Fully recharge the bat-
tery, and install it in the riding mower.
2. Remove the spark plug ahd check that it is clean and properly
gapped
(see p. 38).
Turn the engine a.few revolutions
with the starter motor before reinstall-
ing the spark plug.
3. Thread the spark plug in as far as possible by hand, then tighten it l/8 to
l/4 turn further
with the plug wrench.
4. Check the engine oil level (see p. 17).
5. Fill the fuel tank, and start the engine by following
the starting
instruc-
tions (see p. 24).
NOTE:
If the cylinder was coated with oil, the engine will initially
smoke at
start up; this is normal.
i
55
Hide quick links:
Advertisement
Table of Contents
