Third, Test The Nic; Installing The Legal Paper Tray - NEC 4400 - SuperScript Color Laser Printer User Manual

Third, Test the NIC

Follow these steps to verify that the NIC is installed and
operating properly.
1. Connect the network's twisted pair cable with RJ-45
connectors to the new network port on your printer (A).
Reattach the power cord to the printer (B), plug in the
printer.
2. Turn on the printer (C). It may take up to 90 seconds to
warm up, and then it prints a Network Settings page
with NIC status information (shown on page 72).
note:
Keep the Network Settings page. You will need
this information when configuring the NIC for your
network.
Your 4400 Printer is now a network printer. See Chapter 7,
"Network Setup, " for configuring your system to use the
network printer.
Testing the NIC
A
C
30 SuperScript 4400 Series — User's Guide
B
I
NSTALLING THE
Part #4004
Installation of the optional Legal Paper Tray is simple.
Remove the standard paper tray from the main feeder or the
optional Paper Tray 2 unit. Fill your new Legal Paper Tray
and install as you would the standard tray (see page 19).
Legal Paper Tray
L P T
EGAL APER RAY