Time Zone And Dst - D-Link DES-6500 - Switch User Manual

Time Zone and DST

The following are screens used to configure time zones and Daylight Savings time settings for SNTP. Open the Configuration
folder, then the SNTP folder and click on the Time Zone and DST link, revealing the following screen.
The following parameters can be set:
Parameter Description
Daylight Saving
Time State
Daylight Saving
Time Offset in
Minutes
Time Zone Offset
from GMT in +/-
HH:MM
Using repeating mode will enable DST seasonal time adjustment. Repeating mode requires that the DST beginning
and ending date be specified using a formula. For example, specify to begin DST on Saturday during the second week
of April and end DST on Sunday during the last week of October.
From: Which Day
From: Day of Week
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Figure 6- 53. Time Zone and DST Settings page
Use this pull-down menu to Enable or Disable the DST Settings.
Use this pull-down menu to specify the amount of time that will constitute your local DST offset
- 30, 60, 90, or 120 minutes.
Use these pull-down menus to specify your local time zone's offset from Greenwich Mean Time
(GMT.)
DST Repeating Settings
Enter the week of the month that DST will start.
Enter the day of the week that DST will start on.
Time Zone and DST
83