Honeywell 7600BG-122-B4EE - Hand Held Products Dolphin 7600 User Manual page 75

Storage Card Tab
Running
Programs Tab
Dolphin® 7600 Mobile Computer
User's Guide
Downloaded from www.Manualslib.com
IPSM—Short for Internal Persistent Storage Manager, this is the on-board Flash
memory that is non-volatile. Because this memory is non-volatile, data or programs
stored in IPSM are not affected when power is removed. Autoinstall programs, for
example, are stored in IPSM so that they are always installed at cold-boot startup.
Storage Card—You can install one memory card in Dolphin terminals (see
Door on page 3-12). If a storage card is installed in the terminal, you can select it in
the drop-down list and see capacity and usage statistics for the card.
Anytime you stop a running program, it frees up RAM memory. Be advised that, when
! you stop a program here, any unsaved data in that program is lost. To free up memory
without risking data loss, return to the running program, save your data, and close the
application.
manuals search engine
This tab displays the current capacity and usage statistics
of the selected memory type; IPSM or Storage Card.
Select the memory type from the drop-down list. IPSM is
selected by default.
Total storage card memory=The total MB of memory capacity
of IPSM or Storage Card.
=
In use The MB currently being used.
=
Free The MB that is still available for use.
Displays the software programs currently using Storage
memory.
Check this tab when you are receiving out of memory errors or
when the mobile computer is running slowly.
You can
• Select a program in the list and tap Stop to stop it from
running (and therefore from using memory), or
• Tap Stop All to automatically stop all running programs.
Rev A
5/23/2008
Access
6 - 11