Bottom Panel Features - Honeywell 7600BG-122-B4EE - Hand Held Products Dolphin 7600 User Manual

Bottom Panel Features

Hand Strap Slot
There is an adjustable, elastic hand strap available for purchase with the terminal. When
installing the hand strap, you loop the elastic strip through this slot. For instructions, see
Attaching the Hand Strap
I/O Connector
The I/O mechanical connector is designed to work exclusively with peripherals and cables
designed for the Dolphin 7600 terminal. This connector powers the terminal, charges the main
battery, and facilitates communication.
This connector supports full speed USB 1.1 communication (up to 12 Mbps) and RS-232
communications with a maximum speed of 115Kbps and seven baud rate settings.
Through this connector, you can communicate with a host workstation via Microsoft
ActiveSync; see
The I/O connector supports the following signals:
•
•
•
•
•
•
•
•
•
•
•
•
•
Note: Signals referenced are for a DTE device.
Dolphin® 7600 Mobile Computer
User's Guide
Downloaded from www.Manualslib.com
I/O Connector
on page
ActiveSync Communication
Data Carrier Detect
Received Data
Transmitted Data
Data Terminal Ready
Signal GND
Data Set Ready
Request To Send
Clear To Send
Ring Indicator
USB GND
USB +5V
USB D+
USB D-
manuals search engine
Hand Strap Slot
3-11.
on page 3-18.
Rev A
5/23/2008
3 - 15