Charging The Main Battery - Honeywell 7600BG-122-B4EE - Hand Held Products Dolphin 7600 User Manual
With windows mobile 6.0
Hide thumbs
Also See for 7600BG-122-B4EE - Hand Held Products Dolphin 7600:
- Quick start manual (13 pages)
Table of Contents
Advertisement
Charging the Main Battery
The HomeBase powers the terminal and fully charges its main battery
pack in less than four hours.
As battery packs charge, the charging circuitry follows the two-step
charging process (CC-CV) that is recommended for Li-Ion batteries.
The process monitors changes in temperature, current, and voltage.
Inserting a Terminal
1. Install the battery pack in the terminal; see
on page
2-1.
2. Power the Dolphin HomeBase device; see
HomeBase Device
3. Slide the terminal into the terminal well until the Dock LED lights
green to indicate that the terminal is properly seated.
4. The battery pack begins charging.
Checking Battery Power
To check battery power while the terminal is operating,
tap Start > Settings > System tab > Power
Dolphin® 7600 Mobile Computer
User's Guide
Downloaded from
www.Manualslib.com
on page
10-4.
manuals search engine
Install the Main Battery
Powering the
.
Rev A
5/23/2008
10 - 5
Advertisement
Table of Contents
