Back Panel - Honeywell 7600BG-122-B4EE - Hand Held Products Dolphin 7600 User Manual

Back Panel

Pivot Connector
This pivoting connector swivels 90 degrees. The default position is horizontal, with the
connectors facing straight out the back panel. The pivot connector stops in both the horizontal
and vertical positions, with the connectors facing out the bottom panel.
DC Power Jack
Connect the power cable to this power jack; see
4.
USB Port
This USB port is full-speed (v1.1). Using the USB cable, you can connect the HomeBase
device to a USB-compliant device to facilitate USB communication to and from the terminal.
USB communication occurs through Microsoft ActiveSync (v.4.5 or higher). For more
information about ActiveSync setup, see
Note: You can also purchase a serial HomeBase with a standard DB9 connector for RS-232
Dolphin® 7600 Mobile Computer
User's Guide
Downloaded from www.Manualslib.com
DC Power Jack
USB Port
communication.
manuals search engine
Pivot Connector
Powering the HomeBase Device
ActiveSync Communication
Rev A
5/23/2008
on page 10-
on page 3-18.
10 - 3