Table of Contents
Advertisement
BOLT ( D)
Qty: 1
FLAT W ASHER
(E)
27mm
Qty: 1
WAVY W ASHER
(F)
29ram
Qty: 1
MAINFRAME
CONSOLE CABLES
ELEVATION
FRAME CONSOLE CABLES
A. PuffLEAD WIREthroughRIGHT CONSOLE MASTAfter
puffing the LEAD WIREthrough the mast, the top of the
CONSOLE CABLES s houldbe locatedat the top of the
mast. Detachand discard LEAD WIRE.
B. OpenHARDWARE BAG2.
C.MoveRIGHT LINKAGE A RMinto positionand attach to
ELEVATION FRAME.
NOTE.. Whileholding RIGHT CONSOLE MAST in the
upright position, tighten PRE-ATTACHED
BOLT using
T-wrench to attach RIGHT LINKAGE A RM.
D.AttachRIGHT CONSOLE MAST to MAIN FRAME using 1
BOLT(D), 1 FLAT WASHER ( E)and 1 WAVY WASHER ( F).
E. Lift the RUNNING DECK until lock latch on side of
treadmifl is fully engaged.
F. Remove CONSOLE from boxandplace out of the way.
G.Lowerthe treaflmifl RUNNING DECK from the folded
positionby stepping on LOCK LATCH on lowerright side.
MAST
BOLT (B)
movethe treadmill from the box
i
and themachine has sprung
and Can,ot
b eaSsembled,
refer to the troubleshooting
sectio n in orde r to restorethe
i
treadmill to its proper position,
Hide quick links:
Advertisement
Table of Contents
