Using The Walt-Mounted Door Control; To Open The Door Manually - Craftsman 139.53927 Owner's Manual

Using the Wall.Mounted
Door Control
Press the lighted push button to open or
close the door. Press again to reverse
the door during the closing cycle or to
stop the door while it's opening.
To Open the Door Manually
• To prevent possible SERIOUSINJURY or DEATHfrom
a falling garage door:
- If possible, use emergency releasehandle to
disengagetrolley ONLYwhen garage door is
CLOSED.Weak or broken springs or unbalanced
door could result in an open door falling rapidly
and/or unexpectedly.
- NEVERuse emergency releasehandle unless garage
doorway is clear of persons and obstructions.
• NEVERuse handle to pull door open or closed. If rope
knot becomes untied, you could fall.
DISCONNECT THE TROLLEY:
The door should be fully closed
if possible. Pull down on the
emergency release handle (so
that the trolley release arm
snaps into a vertical position)
and lift the door manually. The
lockout feature prevents the
trolley from reconnecting
_Trolley
Trolley
\ Release Arm
(in Manual
Disconnect
Position)
Lockout position
automatically, and the door can (Manual disconnect)
be raised and lowered manually
as often as necessary.
TO RE-CONNECT THE
TROLLEY:
Pull the emergency release
handle toward the opener at a
45 ° degree angle so that the
trolley release arm is horizontal.
The trolley will reconnect on the
next UP or DOWN operation,
either manually or by using the
door control or remote.
Trolley
__Trolley
Release
Emergency Arm
Release
{Pull at 45 ° angle)
To reconnect
32