GE 20 Owner's Manual And Installation Instructions page 26

mnstallation mnstructions
REVERSING THE DOOR SWING
(cont.)
[] TRANSFER BOTTOM HINGE
BRACKET
(freezer door models, cont.)
[] Install the bottom hinge bracket on the
left side of the cabinet.
[] Replace the base grille by aligning the
prongs on the back of the grille with the
holes in the cabinet. Push forward until
the grille snaps into place.
[]
[]
[]
[]
TRANSFER FREEZER DOOR STOP
(freezer door models)
Remove the door stop on right side of the
bottom of the freezer door by removing
the two screws.
Move the plastic hinge hole thimble to the
opposite hole.
Install the door stop on the left side.
Bottom of Freezer Door
(Right Side)
Bottom of Freezer Door
(Left Side)
[] INSTALL CENTER HINGE
[] Transfer the plug button and screws in
the hinge holes on the left side to the
right side.
[] Install the center hinge on the left side.
[] HANG THE FREEZER DOOR
(freezer door models)
Lower the freezer door onto the bottom
hinge pin, then shut the door, making
sure to align the door with the cabinet.
Make sure the gasket on the door is flush
against the cabinet.
26