Using The Key Operator Programs - Sharp AR-M161 Operation Manual

USING THE KEY OPERATOR PROGRAMS

1
Press the [SPECIAL FUNCTION] key.
2-SIDED
COPY
SPECIAL FUNCTION
DUPLEX SCAN
ACC.
The special function
screen will appear.
2
Select "KEY OPERATOR PRG." with
the [ ] or [ ] key.
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
3
Press the [OK] key.
BACK OK
GHI
The key operator code entry screen appears.
4
Enter the key operator code with the
numeric keys.
OK
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
@.- _
FUNCTION
ACC. #-C READ-END
• " " appears for each digit that you enter.
• The mode selection screen appears.
78
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
SPECIAL FUNCTION
PAPER SIZE SET
DISPLAY CONTRAST
TOTAL COUNT
KEY OPERATOR PRG.
Enter key operator
code.
KEY OPERATOR CODE:
-----
MODE SELECT
KEY OP. # CHANGE
COPIER
PRINTER
SCANNER
5
Select the desired mode with the [ ]
or [ ] key.
Example: The screen when "COPIER" is selected.
6
Press the [OK] key.
OK
The settings of the
selected mode appear.
Several programs will have checkboxes in front of
them. To enable a function (make a checkmark
appear), press the [OK] key. To disable the function,
press the [OK] once again to remove the checkmark.
To configure a program that has a checkbox, go to
step 9.
7
Select the desired program with the
[ ] or [ ] key.
8
Press the [OK] key and follow the
instructions in the program screen.
OK
9
To use another program for the same
mode, select the desired program with
the [ ] or [ ] key.
To use a program for a different mode, press the
[BACK] key and select the desired mode. To exit
the key operator programs, press the [CA] key.
MODE SELECT
KEY OP. # CHANGE
COPIER
PRINTER
SCANNER
COPIER
EXPOSURE ADJUST
MARGIN DEFAULT
ERASE ADJUST
CARD SHOT