Installation Requirements; Environmental Information - Sharp AR-M161 Operation Manual

INSTALLATION REQUIREMENTS

Improper installation may damage this product. Please note the following during initial installation and whenever the
machine is moved.
1. The machine should be installed near an accessible power outlet for easy connection.
2. Be sure to connect the power cord only to a power outlet that meets the specified voltage and current
requirements. Also make certain the outlet is properly grounded.
• For the power supply requirements, see the name plate on the back of the main unit.
Connect the machine to a power outlet which is not used for other electric appliances. If a lighting fixture is
Note
connected to the same outlet, the light may flicker.
3. Do not install your machine in areas that are:
• damp, humid, or very dusty
• exposed to direct sunlight
• poorly ventilated
• subject to extreme temperature or humidity changes, e.g., near
an air conditioner or heater.
4. Be sure to allow the required space around the machine for
servicing and proper ventilation.
A small amount of ozone is produced within the printer during operation. The emission level is insufficient to cause any health
hazard.
NOTE:
The present recommended long term exposure limit for ozone is 0.2 mg/m
average concentration.
However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the copier in a
ventilated area.

ENVIRONMENTAL INFORMATION

As an ENERGY STAR
STAR
8
®
Partner, SHARP has determined that this product meets the ENERGY
®
guidelines for energy efficiency.
20 cm (8")
20 cm
(8")
3
(0.1 ppm) calculated as an 8 hr. time-weighted
20 cm
(8")