Reducing Or Enlarging A Copy; Automatic Ratio Selection; G Manual Ratio Selection (Preset Copy Ratios/Zoom) - Sharp AR-M161 Operation Manual

REDUCING OR ENLARGING A COPY

There are three ways to enlarge and reduce copies:
• Automatic selection of a ratio according to the paper size: Auto ratio selection
• Specifying a ratio from 25% to 400%: Preset ratios/zoom
• Selecting the vertical and horizontal ratios separately: XY zoom
When the SPF is being used, the zoom copy ratio range is 50% to 200%.
Note

AUTOMATIC RATIO SELECTION

1
Place the original in the document
feeder tray or on the document glass.
The original size will appear in the display. If the
correct size does not appear, see "SELECTING THE
ORIGINAL SIZE" (page 50).
Automatic ratio selection can be used when
Note
the original size is , A3, B4, A4, A4R, A5,
11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x
11", 8-1/2" x 11"R and 5-1/2" x 8-1/2". It
cannot be used for other sizes.
2
Press the [PAPER SELECT] key to
select the desired tray.
If the bypass tray is selected,
PAPER COPY AUTO
automatic ratio selection cannot
OPY EXPOSURE
SELECT RATIO IMAG
be used.
CAN COLOUR MODE FORMA
RESOLUTION ADDRESS
FAX PROGRAM BROADCA
MANUAL RATIO SELECTION (PRESET COPY RATIOS/ZOOM)
1
Place the original in the document
feeder tray or on the document glass.
52
3
Press the [AUTO IMAGE] key.
PER COPY AUTO 2-SID
LECT RATIO IMAGE OUTPUT COP
FORMAT
OLUTION ADDRESS ORIGINAL SIZE DUPLEX
BROADCAST
• The copy ratio will be automatically set.
• If the original and paper are in different orientations,
the image is automatically rotated to match the paper
orientation (rotation copy). However, if enlargement is
selected for copying onto a paper size larger than A4
(8-1/2" x 11"), the image will not be rotated.
• Rotation of the image can be disabled in the key
operator programs when reducing or enlarging a
original. (Page 87)
• If the message "Image edge loss." is displayed, part
of the original image may be cut off.
4
Set the number of copies and press
the [START] key (
WXYZ
• To cancel automatic ratio selection, press the [AUTO
IMAGE] key again.
• When copying from the SPF, automatic ratio
selection mode will automatically disable after the
[START] key is pressed and the original is scanned.
2
Press the [COPY RATIO] key.
PAPER COPY AUTO
SURE SELECT RATIO IMAGE OUTP
R MODE FORMAT
RESOLUTION ADDRESS ORIGINAL
GRAM BROADCAST
Copy ratios that can be
selected will appear.
).
COPY RATIO
115%
100%
86%
ZOOM
100%