Key Operator Program List - Sharp AR-FX4 Operation Manual

KEY OPERATOR PROGRAM LIST

The following list shows the key operator programs for the fax function.
Setting Program name
LIST PRINT/SET LIST PRINT
PRINT SELECTION These settings are used to select the condition for printing a
IMAGE MEM.PRINT
(LINE ERROR)
AUTO LISTING
INITIAL DIAL MODE
SETTING
PAUSE TIME
OWN PASSCODE
SET
SPEAKER VOLUME This setting is used to adjust the on-hook volume, the ringing
EXTENSION TEL
DISTINCTIVE RING This setting is used when you have multiple phone/fax numbers
REMOTE
RECEPTION
ACCOUNT
CONTROL
ACCOUNT # SET
DATE & TIME SET
DAYLIGHT SAVING
TIME SETTING
SENDING RES. CON. SET
FUNCTION
AUTO REDUCE TX
ROTATE TX
140
Program function (description)
This prints the Key Operator List, Confidential Code List,
Junk Fax Number List, Sub-address Setting List, ACC.# List,
and ACC. Usage List.
Transaction Report after a transaction is completed to inform
you of the result (completed normally, line error, etc.).
Conditions can be separately set for several types of
communication (regular transmission, broadcast transmission,
confidential reception).
This setting is used to have a portion of the original document
printed on a Transaction Report when a line error prevents the
transmission.
This setting is used to have an activity report showing the
machine's most recent transactions printed out automatically at
a selected time.
This setting is used to set the appropriate dial mode (tone or
pulse) for the line connected to the machine.
This setting is used to set the duration of each pause entered
between digits of a fax number.
This setting is used to program the name of the user of the
machine and the fax number.
volume, and the line monitor volume.
Enable this setting when you have connected an extension
phone to the machine.
assigned to one line and you wish to use a different ringing
pattern for each number.
This setting is used to change the number for activating fax
reception from an extension phone.
This setting is used to turn on Department Code mode.
This setting is used to program department codes and
department names for Department Code mode.
This setting is used to set the machine's internal clock to the
current date and time.
Select this setting to have the clock automatically move forward
and backward at the beginning and end of Daylight Saving
Time.
This setting is used to select the default resolution and contrast
settings for Fax mode.
This setting is used to select whether a transmitted original
image is reduced to fit the size of the paper in the receiving
machine.
This setting is used to have an original that is loaded vertically
rotated to a horizontal orientation (or vice-versa) when
transmitted.
Page
144
145
145
146
146
147
147
148
148
149
149
150
150
151
152
152
153
153