Key Operator Program List - Sharp SF-2050 Service Manual

Key operator program list

Code Program name
P10 Auditing Mode
P11 Copies by Account
P13 Billing Clear Mode
P14 Account Number Control
P16 Account Limit Setting
P18 Account Number Security
P19 Key Operator Code Number Change
P20 Auto Exposure Adjust
P21 Auto Power Shut-off Timer
P22 Toner Save Mode
P23 Auto Clear Setting
P24 Add or Change Extra Presets
P25 Limit of Maximum Copies Selected
P26 Initial Margin Shift Setting
P27 Erase Width Adjustment
P28 Initial Status Setting
P29 Total Copy Count
P31 Preheat Mode setting
P42 Right/Left Shift Direction Selection
P43 Erase Mode Selection
P44 Restrict Storage of Inserts in Job Program Memory Prevents insert pages from being stored in job memory.
P45 Message Time Setting
P46 Disable Operation
P47 Stream Feeding Mode
P70 Disabling of Auto Paper Selection
P71 Disabling of Auto Tray Switching
P72 Bypass-Tray Prohibited in Duplex Copy
P73 Disabling of Job Program Changing
P74 Disabling of Document Feeder
P75 Disabling of Duplex Copying
P76 Disabling of Stapler
P77 Disabling of Covers and Inserts
P83 PC/Modem Access
P90 Display the List of All P Codes
Function
Enables or disables the basic auditing mode for copier access.
Displays the total number of copies made against account numbers.
Clears all audit accounts or selectively clears individual accounts.
Enters account numbers, clears account numbers, changes an
account number, or displays all assigned account numbers.
Sets the maximum number of copies which can be made against an
assigned account number.
Guards against trial and error entering of audit account numbers.
Changes the Key Operator Code Number.
Lightens or darkens copies in the automatic exposure mode.
Activates and sets a time interval after which the copier automatically
turns off.
Reduces toner consumption.
Sets a time interval after which the copier returns to the initial settings.
Adds or changes reduction and enlargement preset copy ratios.
Sets the limit of maximum number of copies to be selected.
Sets the initial margin shift values.
Sets the amount of the erase area.
Sets the copier's initial settings in the ready condition.
Recalls the total copy counts of the copier, document feeder, duplex
section, and staple sorter.
Set the time that elapses before the copier enters the preheat mode
after copying is completed.
Determines whether shift direction change is to be allowed.
Sets the initial mode for erase function.
Sets the length of time that messages are displayed.
Prevents the copier from being started by people other than key
operator.
Enables the stream feeding mode for copying from the document
feeder.
Prevents automatic paper selection.
Prevents automatic switching between the paper trays.
Prohibits the use of the bypass tray during duplex copying.
Prevents stored programs from being altered.
Prevents the use of the document feeder when it malfunctions.
Temporarily prevents the duplex system from operating when it
malfunctions. Allows the use of the copier but not the duplex system.
Prevents damage to the stapler while awaiting repair service. (The
staple sorter is optional.)
Prevents the selection of COVERS/INSERTS mode.
Provides access to key operator programs through a PC/modem
without keyoperator code entry.
(Remote access to key operator programs can be performed only
when a computer or other equipment is connected to the copier directly
or through a telephone line.)
Sequentially displays all available programs.
10 – 2
Page No.
6
6
6
7
9
10
10
11
11
11
12
12
13
13
13
14
14
15
15
15
16
16
16
16
17
17
17
18
18
18
19
19
19
20