Position The Opener - Craftsman 139.53225SRT1 Owner's Manual

Installation Step 4
Position the Opener
Follow instructions which apply to your door
type as Inustbrated.
A 2x4 laid flat is convenient for setting an ideal
door-to-T-rail distance.
• Raise the opener onto a stepladder.
You will need help at this point ff the ladder Is
not tall enough.
• Open the door all the way and place a 2x4 laid fiat
on the top sec/Jon beneath the T-rail.
If the top panel hits the trolley when you raise
the door, pull down on the trolley release arm to
disconnect the inner and outer sections. The
trolley can remain disconnected until Step 12 is
comple_d.
T-rail 2x4
• W'dh the door ful_ open and parallel to the floor,
measure the distance from the floor to the top of
the door.
• Using a stepladder as a support, raise the opener
to the same distance as the door from the floor (it
will be at a slight angle as shown).
• The top of the door should be level with the top of
the opener. Do not position the opener more than
2" above this point.
16